Set 4 flashers 100 mm 12-24 volts for action window E-mark

This complete set consists of four M100 flashers. It is possible to connect several M100 flashers so that, for example, a two-by-two pattern can still be made, as is usual with cutterbars, action windows or sweepers.
This set is suitable for 10-30 volts vehicles. This is a very practical setup for companies that have multiple vehicles. No master/slave or external controllers but everything with 1 model lamp. Low costs and a low stock of spare parts.
The high transparency of the parabolic prism lens guarantees a high light output that can be seen from a great distance. The lamp also has a low power consumption so that your batteries last longer. The housing is made flat, durable and solid. Mounting can be done from the back by means of 4 tapped holes M4.
The M100 is multi-voltage and can be used from 10-30 volts.
This lamp complies with EN12352 standard. Type approval of the lighting is Class F3.

Connection diagram:

• Black = mass (-)
• Red = plus (+)
• Yellow = synchronization. Lamps connected to each other will flash in the same pattern. Switching is done by holding the (joint) yellow wire against the plus (+) (± 1 sec)
• White = asynchronization. By connecting the white wire or wires of the flashers to the plus (+) they will flash alternately from the other flashers.
• Green = By connecting green to the plus(+) the flashers will light up at 50% of the intensity. This can be done, for example, by using a light sensor.