Lazer Linear 18 elite with i-LBA 532mm 135W

Linear-18 elite with i-LBA 21 inch 135W

The Linear-18 elite i-LBA has a super slim design and almost 3x the light output compared to the standard version. A special feature of this LED bar is the intelligent Low Beam Assist (i-LBA). It monitors 30 times a second for oncoming traffic. If oncoming traffic is detected and the standard high beams are turned off (either manually or as part of any vehicle’s automatic headlights function) the high-intensity LEDs which illuminate the distance, are also immediately deactivated. Additional illumination at either side of the road is deactivated a bit later. As soon as the oncoming vehicle has past, these additional lights are automatically reactivated after a short delay. When the high beam driving lights are switched on again (either manually or automaticly) the high-intensity LEDs are also activated again.

Despite its small size, the LED bar contains more innovative solutions that extending its service life.

The LED bar can be safely mounted with the supplied anti-theft side mounting brackets. It is supplied with an LBA cable connection set for 1 lamp. This connection set includes a second switch with which the LBA function can be switched off and a 4-pins deutsch connector.

In E-mark compliant mode, the Linear-18 elite i-LBA is R10 and R112 class B is certified as a high beam driving light. However, in E-boost mode, the light output exceeds the R112 standard allowing it to be used only off-road.

A discreet installation by day, but a noticeable presence in the dark.

Specifications: (values in E-Certified mode are indicated between brackets)

• Voltage: 10-32V
• Power: 135W (43W)
• Consumption at 14.4V: 10.4A (3.2A)
• Number of LEDs: 48
• Lumen, theoretical: 18,000 (5,538)
• Light range: 1 LUX @: 522 m (286 m); 0.25 LUX @: 1,043 m (571 m)
• Light pattern: wide, 64 degree angle
• Light color: 5,000K
• Startup time: 100 ms
• Water resistance: IP67
• Dimensions: 532 x 41 x 62 mm; 560 x 54 x 62 mm incl. brackets
• Housing: aluminum
• Mounting brackets: stainless steel
• Weight: 1.09 kg
• Certification: R10, R112 in E-Certified mode
• Lazer article number: 0L18-LBA-B

Check out the various mounting brackets available to install your lamp.